VR-IV Heat Recovery range
67.00kW
67.00kW
AJT216GALCH
| Product Category | VR-IV Heat Recovery |
| Product Range | VR-IV Heat Recovery range |
| Capacity | 67.00kW Cooling 67.00kW Heating |
| Model Number | AJT216GALCH |
Technical Specifications
| Outdoor unit | AJT108GALCH |
| Operation Type | Heat Recovery |
| Maximum Connectable Indoor Units | 45 |
| Power Source V/Ph/Hz | 400 / 3 / 50 |
| Capacity Class kW | 67 |
| EER Cooling kW/kW | 3.31 |
| COP Heating kW/kW | 4.1 |
| Outdoor Sound Pressure dBA (Cooling / Heating) | 62 / 65 |
| Outdoor Unit Dimensions mm (Height x Width x Depth) |
AJT108GALCH x2 (1690 x 930 x 765) |
| Outdoor Unit Weight kg | AJT108GALCH x2 (262.00) |
| Piping Connects mm Ø (Liquid / Gas / Discharge) | 15.88 / 34.92 / 28.58 |
| Max Height Difference m | 50 |
| Operation Range Cooling °CDB (Min to Max) | -10 to 46 |
| Operation Range Heating °CDB (Min to Max) | -20 to 21 |
| Refrigerant Type | R410A |
| Refrigerant Amount g | AJT108GALCH x2 (11,800) |
Show all specifications
Collapse all specifications
Key features
This system allows for simultaneous cooling and heating operation using one refrigerant system, with high efficiency or space-saving options.
-
Flexible Piping OptionsPiping can be connected by using either separation tubes or headers to suit a variety of project designs.
-
Long Piping Capability 1000m
Our advanced refrigerant control technology allows us to achieve a total refrigerant piping length of up to 1000m.
-
3 Phase DC Outdoor Fan
Efficiency is improved with the highly efficient motor with sophisticated drive control. Additionally, the DC fan motor exhibits low noise output.
-
Subcool Heat Exchanger
High heat exchanger efficiency is achieved by using an internal projection shape with double pipe construction.
-
Multiple Outdoor Operation
When multiple outdoor units are connected, a sophisticated operation is performed by each compressor. Rather than running one compressor at full load and distributing refrigerant to one heat exchanger, this control method operates all compressors at part load and distributes refrigerant to all of the heat exchangers allowing for the overall system efficiency to be improved.
-
4-Face Heat Exchanger
Heat exchanger efficiency is significantly improved by the introduction of a new 4-face heat exchanger with an increased effective surface area.
-
Variety of RB Units
1 to 12 port RB units are availabe to offer greater flexibility with refrigerant piping work for various floor layouts and building structures.
This product is part of the VR-IV Heat Recovery range
Back to VR-IV Heat Recovery range
Find a Stockist