HELP CENTRE

FAQs: Operation

Why is My Heat Pump Light Flashing?

By Kyle Rafter - August 27, 2025

If a Fujitsu heat pump or air conditioner is displaying a blinking light, an error code or unusual performance, try a manual reset first. To let the system completely power down, we advise turning off the isolation switch at the unit for at least five minutes. This action frequently fixes minor internal mistakes or temporary problems brought on by power outages. The unit could start running normally and stop showing any warning signals once the switch is turned back on.

If your unit is under warranty and its light is still flashing, contact Fujitsu Service to arrange for a technician to take a look. Should it be out of warranty, you can choose a licensed technician to check and fix the system. Ensure they are knowledgeable about Fujitsu products, especially if they need to access internal diagnostics or interpret LED fault indicators. Acting quickly helps keep your system running effectively and prevent further damage.

Air Conditioner Blinking Lights: What Do They Mean?

Fujitsu systems use LED lights to communicate a range of system alerts. A flashing green or orange light can signal issues like blocked filters, low refrigerant or fan malfunctions. These lights often correspond to internal fault codes, which help technicians diagnose the problem. If the LED continues to flash after a reset, refer to your user manual or the Fujitsu website for guidance. You should also watch for a consistent blinking pattern, as this may help identify the fault.

Error Codes

The wall mounted unit displays three indicator lights: Operation (green), Timer (orange), and Economy (green). During normal operation, one or more of these lights will be illuminated, depending on the specific function you are utilising. If all three indicator lights begin to blink in a specific pattern, it could indicate an error or another system fault. If you're using a wireless remote controller, error codes will be shown through blinking patterns on all three LED lights. With a wired remote controller, error codes appear directly on the remote display. If you encounter either of these light signals or error displays, we recommend contacting a service technician to help check and identify the cause.

To keep your system running efficiently and your indoor air fresh, it’s important to regularly clean air conditioner filters and remove any dust or debris.

When Assistance is Needed For Fujitsu Heat Pump Flashing Lights

While an air conditioner blinking light is not always cause for concern, it can indicate that your system requires maintenance, particularly if the unit is not running as it should. With our built-in diagnostic features and expert support network, you can restore comfort quickly and confidently.

Need help with your Fujitsu heat pump or air conditioner? Get in touch with our trusted service team for expert support, troubleshooting or to book a maintenance check — we’re here to keep your comfort running smoothly.

Kyle Rafter
General Manager, Product & Strategy at Fujitsu General Australia & New Zealand

Kyle has over 16 years experience within the air conditioning industry. Since joining Fujitsu General in 2015, Kyle has driven innovation and growth, leveraging his expertise in commercial business development. Passionate about cutting-edge technology, Kyle is dedicated to advancing sustainable solutions in the air conditioning sector.

Search FAQs

submit a service request

Submit a support request

Lodge a support ticket and a Fujitsu General Assist team member will get back to you as soon as possible.

icon-mail-white Lodge a Ticket icon-phone-white Book a service call